Processing programm

Our stainless steel products can be delivered in coils, strips, blanks and polished sheets.

	Thickness (mm)		Width (mm)		Lenghth (mm)
	Min	Max	Min	Max	Min	Max
Cut to length	0.40	4.00	250	1580	250	6000
Slitting	0.40	4.00	10	1580
Polishing	0.40	300	250	1550	400	4000

Tolerances

Normal Thickness Tolerances (+/- mm)
Thickness in mm	Width in mm
	W≤1000	1000<W≤1300	W>1300
0.30=t<0.50	0,035	0,035
0.50=t<0.60	0,035	0,040
0.60=t<0.80	0,040	0,045
0.80=t<1.00	0,050	0,055	0,060
1.00=t<1.20	0,060	0,065	0,070
1.20=t<1.50	0,070	0,075	0,080
1.50=t<2.00	0,080	0,085	0,100
2.00=t<2.50	0,090	0,100	0,110
2.50=t<3.00	0,110	0,110	0,120
3.00=t<4.00	0,130	0,140	0,140

Normal Width Tolerances (+/- mm)
Thickness (mm)	W≤125	125<W≤250	250<W≤600	600<W≤1000	W>1000
0.30≤t<0.50	0,3	0,5	0,7	1,0	1,0
0.50≤t<1.00	0,3	0,5	0,7	1,0	1,0
1.00≤t<1.50	0,5	0,7	1,0	1,4	2,0
1.50≤t<2.50	0,7	1,0	1,2	2,0	2,0
2.50≤t<3.50	0,8	1,0	1,2	2,0	2,4
3.50≤t<4.00	1,0	1,0	1,2	2,0	3,0

Normal Width Tolerances (+/- mm)
Thickness (mm)	L≤2000 mm		L>2000 mm
	normal	fine	normal	fine
0.30<t<2.00	3,0	2,0	0.25%XL	0.15%XL
2.01<t<4.00	5,0	3,0	0.25%XL	0.15%XL

SQUARNESS		FLATNESS TOLERANCES
Maximum squarness		Maximum flatness
Length (mm)	mm	Length (mm)	mm
L≤3000	6,0	L≤3000	10,0
L>3000	10,0	L>3000	12,0

EDGE BOW TOLERANCES
Width	For below mentioned lengths max. (mm)
	1000	2000
25≤W<40	3,00	12,00
40≤W<125	2,00	8,00
125≤W<500	1,50	6,00
500≤W<1500	1,00	4,00

PE FOLIO & COATINGS
Type	Application
White/Black	Transport, stocking & average forming
Transclucent blue	Thin products suitable for average, single-press forming
Deep drowing	For bending, heavy forming and/or multipass operations

All tolerances are according to EN 10259 and ASTM A 480. For fine tolerances, please contact our technical department.